受控膜版Capillex CP/CX毛细水菲林操作指南
Synopsis...
Introducing Capillex CP
Capillex CP is based on the revolutionary new Controlled Profile stencil technology to provide a thin, flat stencil that is both easy to use and very tough. Typically Capillex CP will produce an EOM of only 2.5 - 3.0µ on a mesh range of 305/" - 460/" (120/cm - 180/cm) combined with a low Rz.
The benefits that Capillex CP bring to the high quality four colour halftone printer are:
|
Feature |
Benefit |
|
Low Stencil Profile |
Minimises ink deposit to reduce skipping |
|
Reduced squeegee pressure |
Improves ink transfer for fine dots |
|
Reduces image distortion |
Reduces stencil wear |
|
Low Rz |
Improves print definition |
|
Wide latitude |
Easy to use |
Not only will Capillex CP reduce the problems caused by high ink deposit, it will also print a wider, cleaner tone range than a conventional stencil.
As there is less dot gain in the print, this significantly reduces the amount of artwork compensation that is required.
A thin, flat stencil is easier to print and is less affected by on-press variables. Changes in squeegee pressure and angle have very little effect on the print quality.
Capillex CP is extremely easy to use from small to large format, especially when used with the new Caplicator programme from Autotype.
